JP Hobby Electrical Magnetic Brake Controller V2

JP Hobby Electrical Magnetic Brake Controller V2

Electrical Magnetic Brake Controller - For RJP Hobby magnetic brake systems. This is the same controller that is included with JP Hobby Electric Wheel and Brake Sets.

JP E-Brake Using illustration

• Voltage Input: Compatible with 2S–6S. Can be powered directly from the aircraft’s main battery or from an external 2S–6S battery.

• Voltage Output: 6–10V

• Signal Input: Connect the module to a two-position switch channel on your receiver.

• Brake Force Control: The braking force is managed through the servo travel or endpoint settings configured on your transmitter (TX).

• Adjustment:
  You can adjust the braking force by setting the travel percentage on your transmitter. For maximum brake force, set the value to ±100% (or higher if your radio supports it, e.g., ±140%). To reduce the braking force and achieve a smoother braking response, lower the percentage accordingly. However, always begin testing with the maximum value.

Specifications

•  Input：7.4v~26v (2~6S lipo)
•  Output Voltage: 6~10V
•  Size: 35 x 24 x 6mm
•  Weight: 15g