> SebArt Mini Avanti S V3 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue)

Top sellers

All best sellers

Specials

No special products at this time.

Viewed products

Create quotation from my cart Request a quotation
New SebArt Mini Avanti S V3 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue) View larger

SebArt Mini Avanti S V3 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue)

SEB-A140-WB+JPH8S

New product

Sebart

Combo with JP Hobby 90mm full metal EDF with 8s 1400kv motor and ESC - Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

More details

Available

By buying this product you can collect up to 1040 points . Your cart will total 1040 points that can be converted into a voucher of $24.96 .


$1,249.00

Instead of $1,427.00

Paiement Sécurisé
Paiement Sécurisé
Must have accessories and options

SERVOS

Data sheet

Wingspan (mm): 1360mm / 53,54 in
Length (mm): 1420mm / 55,9 in
Weight (gr): 3800 gr (flying weight)
Wing Surface Area: 38dm² / 589 sq in
CG (Center of Gravity) Check manual
Servos 7x sub micro servos
Direction of Rotation (EDF Rotor) Classic Counter Clock Wize (CCW)
EDF Diameter Class (mm): 90
Blades: 12
Turbine shroud Metal
EDF Rotor Metal
Turns/min/Volt (Kv): 1400 Kv
Motor Type: Out-Runner
Electronic Speed Control 120A HV + Ubec 5A
Battery Cells: 8s - 29.6v
Battery Capacity (mAh) 5000-5.800 mAh
Surfaces Ailerons, Rudder, Elevator, Flaps
Landing Gear Retractable
Material Fiberglass, Carbon reinforcements, Wood
Build time 3 hours
Required Radio 6 channels minimum
Recommended pilot skill level Intermediate, Advanced

More info

SebArt Mini Avanti S 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue)

Combo with JP Hobby 90mm full metal EDF with 8s 1400kv motor, 120A HV ESC and 5A Ubec.

Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. 

The Mini Avanti S ARF Jet was designed by the Italian aerobatic champion, Sebastiano Silvestri. This sport jet model design is based on the BAE Hawk real aircraft design and enhanced by adding the ultimate aerodynamics principals of the modern FAI pattern models and using the 15 years experience in flying jets of Seba.... the result is outstanding!

This innovative design combined with a lightweight structure, the full composite fiberglass fuselage and all wood airframe wings and stabs, give the Mini Avanti S new levels of precision and smoothness at any airspeed and flight conditions.

Nota: Pictures of the livery for information only. The pictures of Avanti S livery White/Yellow are not yet available.

Features

  • Painted fiberglass fuselage
  • Wings and stabilizers in balsa covered with Oracover
  • Factory installed electric retract landing gearnwith doors sequencer included
  • 90mm JP Hobby 100% metal EDF with 8S 1400kv motor

Technical specifications

  • Wing Span: 1360mm / 53,54 in
  • Length: 1420mm / 55,9 in
  • Wing area: 38dm² / 589 sq in
  • Weight (EDF version): 2.9kg / 6,393 lb (without battery)
  • Flying weight (version EDF): approx. 4.1kg (with 5800mAh 8s Lipo) 
Note: The factory-installed electric retracts, nose gear door servos and steering servo can NOT be powered by more than 6.0V. If you intend to use HV servos for the control surfaces and use a 2S 7.4V LiPo pack, a voltage regulator will be required to prevent damage to the sequencer.

Includes

  • SebArt Mini Avanti S 90mm Jet 1,36m (White/Blue)
  • Pre-installed electric retracts, gear doors and their 3 corresponding servos and sequencer.
  • JP Hobby 90mm full metal EDF + 8S motor 1400kv
  • 120A ESC
  • 5A UBEC

Requires

  • Minimum 6 channels radio and receiver
  • 7x sub micro servos (1x rudder, 2x elevator, 2x ailerons, 2x flaps), ie: Spektrum A4030 
  • 5000-5800 mAh 35-50c Lipo Battery (8s)
  • Lipo Battery Charger
  • Estimated build time is 3 hours

EDF Ducted Fan JP Hobby 90mm + 8s Motor 1400Kv

100% CNC aluminium JP Hobby EDF unit (shroud and rotor) for 8s.

Description

  • The V2 version offers an exceptional reduced gap of 0.25mm between each blade edge and the EDF shroud for more efficiency.
  • Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
  • The shroud acts as a heat sink, removing heat from the motor. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.
  • The highly rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity for maximum speed and efficiency.
  • Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
  • Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan.
  • You could assemble our EDF system with any other motor without losing dynamic balance effetc.

The motor and fan unit comes assembled and balanced from the factory.

Note: For a better motor heat dissipation, the manufacturer does not recommend the usage of the motor cone cover wiht the most powerful setups. If you decide to use it, please always make sure to check the motor temperature is not excessive after the first flights.


Measures

About the above measures : they have been read on the test bench with the intake lip on the unit. The measures have been made using a bench stabilized power source. Results may changed depening upon your equipment and situation.

 Description / LiPo    8s (31.0v) 
 Thrust: 4.02 kg 
 Current: 93.4 A
 Power: 2895 W
 Recommended ESC: 120 A / HV 
 Recommended battery:   3500mAh 40C  
 

The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controler up to 6s, HV = high voltage controler above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Specifications

  • Special high grade aluminum quality
  • Motor Kv: 1400Kv
  • Motor: JP 4250-Ⅵ-1400kv (5mm axle) 12 poles (outrunner)
  • Rotor: 90mm 12 blades aluminium
  • External diameter: 94.5mm
  • Internal diameter: 90.5mm
  • Ejection diameter: 77.6mm
  • Combo max thrust: 4.32kg
  • Weight: 459g (combo EDF + lip + motor )
  • Max efficiency: 90 %
  • Recommended max. rotation speed: 75,600 RPM
  • Speed Control Advanced Timing Setting: 15°
  • Connections: Banana / PK 5mm (in place)

Content

  • 1x JP Hobby 8s 90mm full metal EDF unit





			

			
		
		
		

			

			
Reviews

	

			

	

								
No customer reviews for the moment.

						
 






	

		

			

				Write a review
			

			

									

						SebArt Mini Avanti S V3 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue)
						

							

								SebArt Mini Avanti S V3 90mm Jet 1,36m + JP Hobby 90mm 8S PNP (White/Blue)
							

							
Combo with JP Hobby 90mm full metal EDF with 8s 1400kv motor and ESC - Sebart fiberglass mini Avanti S Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.

						

					

								

					
											
    
													
  • 
								
								
    
									
									
									
									
									
								
    
								
    
							
    • 
												

										
					
					
					
										 
				

			

		

	





		

		

		
								
	



				

			
Pack content

				
									
		
	
	

		
	





		

		
					

			

				
Accessories
					

					

				


				
			

			
		
		

	

		
					30 other products in the same category:
				
		

		

	

	


			

	




				

	
The following statistics are only displayed on your client account